5 Services Gas Fitters Provide

Ask most people what a gas fitter does and you will hear something about connecting the cooktop. True, but that is one corner of the trade. In Queensland, any work on gas lines or gas appliances legally requires a licensed gas fitter, and the licence exists because the work spans far more than kitchen appliances. Here are the five core services licensed gas fitters provide, and a note on which of them we focus on ourselves.

1. Gas Appliance Installation

Cooktops, ovens, ducted and space heaters, and outdoor appliances all need correct connection, the right regulator and jet setup, and a leak test before first use. The gas fitter also confirms ventilation meets the standard, which matters enormously for indoor heaters, and then issues a compliance certificate. Keep that certificate: your insurer or a future buyer will want it.

2. Gas Hot Water Systems

Gas hot water is the crossover point of two trades, plumbing and gas fitting, which is why a dual-licensed team saves you a second call-out fee. Installation involves water connections, the gas line and flue, pressure testing and commissioning. Continuous flow systems in particular need the gas supply sized correctly, since an undersized line starves the burner and the shower goes lukewarm every time someone opens a second tap. More detail on options is on our hot water systems page.

3. Gas Leak Detection and Repair

The rotten egg smell is added to gas precisely so your nose becomes a detector, but many leaks hide underground or inside walls where smell disperses. Gas fitters use pressure testing and electronic detectors to find leaks, then repair or replace the affected line. If you ever suspect a leak: shut the meter valve, open windows, leave switches and flames alone, and call a licensed gas fitter immediately. We treat leaks as 24/7 emergencies.

4. New Gas Lines and Conversions

Extending gas to a new kitchen island, running a line to the alfresco for a BBQ bayonet, or connecting a whole home to natural gas for the first time all count as gas line work. So do conversions between LPG bottles and natural gas, which involve changing jets and regulators and re-testing the system. Each of these ends with a pressure test and certification.

5. Safety Inspections and Compliance

Landlords, sellers and body corporates regularly need gas installations inspected and certified. A gas safety check confirms appliances burn correctly, connections are tight, ventilation and flues are adequate, and the system holds pressure. It is cheap insurance in the most literal sense: unlicensed or uncertified gas work can void a home insurance policy exactly when you need it.

The Short Version

If a job involves gas, it involves a licence, and every job should end with the paperwork that proves it was done right. At Gold Coast Plumbing Services our gas work is focused on one of the five: gas hot water systems, installed, repaired and replaced across the Gold Coast from Tweed Heads to Springwood. For cooktops, BBQ points and new gas lines you will need a general gas fitter, but if your job is hot water, see our gas hot water page or call 07 5519 3044.